Uni-Pole-IV Pole for Surgery Tables MCM216
Mid Central Medical is an American manufacturer of medical equipment. We focus on attention to detail in every area of our business. We are committed to exceed the expectations of medical professionals across the country and around the globe.
Stainless Steel Intro
Stainless steel is chosen because it is exceptionally durability and resistance to heat, corrosion, rust, staining, moisture and damage. It is ideal for medical appliances and where needed it is welded for strength with a smooth surface which is easy to clean, making it ideal for environments where cleanliness is critical. Stainless steel is resistant to bacterial growth and can be easily sanitized with standard cleaning agents. Follow the factory guidelines.
They stainless steel shelves, carts, surgery table accessories and appliances come in various sizes to suit most office, lab or industrial needs. They have a sleek and modern appearance that complements a variety of design styles so they will enhance the look of your clinic, lab, office, kitchen and any other area where you need a durable cleanable surface.
Stainless steel appliances can withstand exposure to moisture, chemicals, and harsh environmental conditions without corroding or deteriorating, making them ideal for any harsh environment or even outside projects. Using this material you never paint, refinish, or require any special treatments.
Stainless steel is also a recyclable material, so it is sustainable and eco-friendly.
- 2 Hook Top
- Stainless steel IV pole construction for durability
- Unique clamp mounts pole to most surfaces up to 1 1/4" diameter
- Adjusts from 18 to 36 inches
- Universal design
- Eliminates the need for additional clamps
- Rotates 180 degrees for storage
- This IV Pole is warranted against defects in workmanship and materials for 2 years
- Uni-Pole SS Universal IV Pole or Table Pole
- Made by Mid Central Medical
- Factory part number: MCM216
Cleaning and Maintenance
The attractive and hygienic surface appearance of stainless steel products cannot be regarded as completely maintenance free. All grades and finishes of stainless steel may in fact stain, discolor or attain an adhering layer of grime in normal service. To achieve maximum corrosion resistance the surface of the stainless steel must be kept clean.
Stainless steel is easy to clean. Washing with soap or a mild detergent and warm water followed by a clean water rinse is usually quite adequate for most medical equipment. Use a soft brush or cloth to remove stubborn dirt or blood. Do not use abrasive clothes or pads that will alter the finish of the stainless steel. An enhanced appearance will be achieved if the cleaned surface is finally wiped dry. We do not recommend using a cart washer for stainless steel equipment unless it is specifically rated for using in a cart washer. This can damage wheel bearings, parts glued on may release due to heat and water may be retained on some pieces of equipment. This can void manufacturer’s warranty.
Most stainless steel equipment does not need to be sterilized as it is usually not in direct contact with surgical instruments. If stainless steel is required to be sterilized, please check with sterilization equipment manufacturers for settings as equipment cycles vary.
After stainless steel has been cleaned, you will want to disinfect before use. This is best done with disposable wipes not containing chlorine bleach. If bleach wipes are used, you will need to do a final rinse with clean water to remove the bleach residue as it will cause the stainless steel to have a
cloudy finish or white residue over time. We recommend using Super Sani-Cloth® Germicidal Disposable Wipes to disinfect stainless steel medical equipment.