1. Home
  2. Medical Equipment
  3. Medical Oxygen
  4. Connect2 Quick-Connect Medical Gas Air Wall Plate 64-02-5003P
FREE SHIPPING ON ORDERS $200+ IN CONTINENTAL USA ONLY - RESTRICTIONS APPLY - lARGE ITEMS AND ITEMS DELIVERED BY TRUCK ARE EXEMPT FROM THIS POLICY.  MINIMUM EXPORT ORDER $250.00 - MINIMUM SHIPPING CHARGE FOR EXPORT ORDERS IS $49.00 OR ACTUAL COST WHICHEVER IS HIGHER
Connect2 Quick-Connect Medical Gas Air Wall Plate
Connect2 Quick-Connect Medical Gas Air Wall Plate

Connect2 Quick-Connect Medical Gas Air Wall Plate 64-02-5003P

Your Price: $79.00
Retail Price:$90.00
Your Savings:$11.00(12%)
Connect2 Quick-Connect Medical Gas Outlet-Air Wall Plate
Part Number: 64-02-5003P
Quantity Price
2 - 3 $77.42
4+ $75.84

Connect2 Quick-Connect Medical Gas Air Wall Plate 

  • This is the Quick-Connect Medical Outlet (Wall Plate) for Air
  • Includes wall plate, mounting box & rotating inlet tube
  • Accepts both Chemtron and Ohmeda adapters in the same outlet
  • Push button release for Chemetron adapter; Ohmeda adopters are twist released
  • Cleaned for oxygen service
  • Safety keyed to help prevent cross-connections
  • Conforms to NFPA and CGA
  • UL and CSA approved
  • Priced 1 per box
The Allied Connect2® medical gas outlet stations provide convenient access to medical gases in patient care locations. They accept either a Chemetron or Ohmeda adapter in the same outlet.

The outlets are field-gangable in any order desired by the facility. Outlets are spaced 5" (12.7 cm) center to center. Outlet finish plates and rough-in plates are pin indexed using steel pins for positive cross-connection prevention. Primary valves are separate from the finish plate, allowing easy testing for leaks and cross connection. Primary valves are made of brass and contain a chrome-plated self-sealing poppet. Primary valves are field-adjustable to compensate for variations in plaster thickness of 1/2" to 3/4". Outlets may be special ordered with extended valve bodies that allow for an additional 3/8" or 3/4" adjustment.
The type K copper inlet tube has a 1/2" OD connection, and can rotate 360 degrees to accommodate any field piping arrangement. The primary gas check can be serviced without shutting off the gas supply.

Finish plates consist of a stainless steel insert surrounded by a silver metallic-finish ABS high-impact decorative trim.

The outlet stations are fully compliant with NFPA 99 1999 and CGA G-4.1. The outlet is UL listed. Finish plates consist of a stainless steel insert surrounded by a silver metallic-finish ABS high-impact decorative trim. Gas identification is provided by a polycarbonate plastic insert, color-coded by gas service, per NFPA and CGA.

Release is easily accomplished with one hand using a push button release (or twist release for Ohmeda style adapters). The primary valve poppet provides a dust-proof seal. Vacuum outlets may be used without slide brackets for vacuum collection bottles of up to 1/2-gallon capacity.

 

 

Related Items

Browse Similar Items

Recently Viewed Items